DC Heat Resistant Paint (Matt)

DC Heat Resistant Paint (Matt)

DC Paint Solutions are pleased to offer our newest tried and tested product DC Heat Resistant Paint. This paint comes in a 1 pack Acrylic based Jet Black and Silver Matt finish paint which you can apply to most substrates without the need of applying a primer. To apply, please clear any debris of the substrate and any chemical or oil based residues with degreaser. Dry the substrate and then add between two and four coats of the heat resistant paint. Leave to cure for at least 1 hour at room temperature (please note: if the temperature is colder it may take longer to cure). Once the substrate is dry to the touch you are ready to use as you see fit. The cans will spray around 1 meter squared per can. The heat resistant paint can withstand heat upto at least 300 degrees.

MUST NOT be applied around children

MUST apply in ventilated area

Use

General industrial manufactured items.

Characteristics

• Fast drying
• Easy application
• Excellent adhesion on aluminium and its alloys, zama (zinc+aluminium+magnesium), brass and epoxy primers (a previous adhesion test is always recommended)
• Excellent light resistance